Merry New Year!
Well I’m back after a two week winter break. It was weird taking so much time off and utterly unproductive so I’m glad to be back at work. 🙂
Today I’m working on the main board that the receiver and transmitter boards plug into. This is the board with the ARM, ADC/DAC, and local oscillators.
Here’s the receiver board:
Here’s the transmitter board:
Each board will plug into the main board via the card edge connectors.
Update: 6:15 PM
I’ve got a good start on a main board. I’ve grouped all the related components and started routing the more critical traces. It’s a start!
